Service Manual

9-17Power Max Service Manual
WHEEL CLUTCH
TRACTION DRIVE SYSTEM
28. Bolt wheel hub to axle shaft and torque to 115 + 15
in-lbs. (12.99 + 1.7 Nm) (Fig. 178).
Fig 178 MVC-884XT.jpg
29. Install the belt extension cover and belt cover.
30. Check clutch cable adjustment and adjust if
necessary. See Adjustments
27. Wheels are installed with the ā€œVā€ tread rotation
forward (Fig. 177).
Fig 177 MVC-880X1.jpg
WHEEL CLUTCH DISASSEMBLY
1. Remove 11-tooth gear from 32-tooth gear by sliding
it from the shaft (Fig. 179).
Fig 179 MVC-876XB.jpg
Fig 180 MVC-877X.jpg
2. Slide off washer behind the 11-tooth gear (Fig. 180).