Use and Care Manual

4.Setthegapbetweentheelectrodesonanew
sparkplugat0.76mm(0.030inch)asshown
inFigure40.
g001029
Figure40
1.0.76mm(0.030inch)
5.Installthenewsparkplug,tightenitrmly,and
attachtheignitionwiretothesparkplug.
Note:Ensurethattheignitionwiresnaps
completelyintoplaceonthesparkplug.
Adjustingthe
Discharge-ChuteLatch
Ifthedischargechutedoesnotlockintothedesired
positionordoesnotunlocksothatyoucanmoveitto
anotherposition,adjustthedischarge-chutelatch.
1.Removethefasteneronthegearcover(Figure
41),liftthefrontofthecoverup,andslideitback
andoutoftheway.
g001030
Figure41
2.Loosentheboltonthecableclamp(Figure42).
g001031
Figure42
1.Cableconduit2.Cableclamp
3.Graspthecableconduitandmoveittowardthe
frontofthemachineuntilthedischarge-chute
latchfullyengagesthegearteeth(Figure42
andFigure43).
g001032
Figure43
1.Discharge-chutelatch
2.Gearteeth
Note:Thelatchisspringloadedandnaturally
movesintotheteethofthegear(Figure43).
4.Removeanyslackinthecablebypullingthe
cableconduitrearward.
5.Tightentheboltonthecableclamp,being
carefulnottostriptheplasticpart.
6.Installandsecurethegearcover.
ReplacingtheDriveBelts
Iftheauger/impellerdrivebeltorthetraction-drivebelt
becomesworn,oil-soaked,orotherwisedamaged,
haveanAuthorizedServiceDealerreplacethebelt.
23