Service Manual

CHASSIS
3-18
Toro Single Stage Snow Service Manual
5. With the cable retainer removed, note the direction
of the cable wrapping (Fig. 025).
6. To re-wrap the cables, refer to the following steps
and the illustrations on pages 3-13 and 3-14. With
the pinion gear facing up, the black cable is routed
furthest to the bottom of the gear. Insert the barrel
end of the cable into the hole and secure the cable
under the tab in the gear (Fig. 026).
7. Wrap the cable around the bottom of
the spool (Fig. 027).
8. When the cable is fully wrapped, it should look
like this (Fig. 028).
Fig. 025
Fig. 026
Fig. 027
Fig. 028