Service Manual

ENGINE MOUNTING
5-6
Toro Single Stage Snow Service Manual
5. Route the recoil rope through the lower shroud and
knot the rope (Fig. 012).
6. Disconnect the primer hose from the primer bulb and
remove the ignition wires from the ignition switch.
(Fig. 013).
1. Remove the shroud as outlined in chapter 3.
2. Empty the fuel from the fuel tank into a suitable
container. Remove the fuel hose and remove the
fuel tank.
3. Remove the screw from the underside of the choke
knob and remove the choke knob (Fig. 010).
4. Untie the knot on the recoil handle (Fig. 011).
Fig. 010
Fig. 011
Fig. 012
Fig. 013
Engine Removal 21 Inch Models