Service Manual

3. Remove the three rotor bearing screws on the
opposite side of the housing (Fig. 007).
4. Remove three bolts holding the side plate to the
rotor housing (A). Loosen the wheel bracket
bolts (B) (Fig. 008).
POWER PROPEL SYSTEM
Toro Single Stage Snow Service Manual
4-6
1. Remove the belt cover. Remove the drive belt (A)
and the rotor pulley (B) (Fig. 005).
2. Remove the three rotor bearing screws on the belt
side of the housing (Fig. 006).
18 Inch Rotor Removal & Replacement
Fig. 006
Fig. 007
Fig. 005
A
B
Fig. 008
B
A
B
B
A
A