Service Manual

POWER PROPEL SYSTEM
4-7
Toro Single Stage Snow Service Manual
8. Slide rotor back into the housing. Reinstall the bolts
and torque to 8 ft-lbs (11 Nm) (Fig. 012).
9. Re-install the rotor pulley and drive belt. Torque rotor
pulley bolt to 8 ft-lbs (11 Nm) (Fig. 013).
10. Re-install the belt cover. Torque bolts to 8 ft-lbs
(11 Nm).
5. Pull the side plate out slightly to gain clearance to
get the rotor out (Fig. 009).
6. Lift rotor assembly out of the housing (Fig. 010).
7. Replace rotor parts as required (Fig. 011).
Fig. 009
Fig. 010
Fig. 011
Fig. 012
Fig. 013
A
Power Propel System
4