Service Manual

ENGINE MOUNTING
5-7
Toro Single Stage Snow Service Manual
7. From the underside of the chassis, remove the two
engine mounting bolts (A) (Fig. 014).
8. Remove the belt cover and belt as outlined in
chapter 2 (Fig. 015).
9. Remove the engine pulley.
10. On some models, the engine pulley has two set
screws. One is an allen head set screw and the
other is a bolt. Be sure to loosen both set screws
before attempting removal (Fig. 016).
Engine Mounting
5
Fig. 014
A
A
Fig. 015
11. Remove the four engine mounting bolts that secure
the engine to the engine plate (A) (Fig. 017).
12. Remove the engine from the chassis (Fig. 018).
Fig. 016
Fig. 018
Fig. 017
A
A
A
A