Operator's Manual

3351-827 Rev A

Operation

Note: Determine the left and right sides of the

machine from the normal operating position.

Starting the Engine

1. Turn the ignition key

clockwise to the On

position.

m-6189

2. Move the choke

lever to the right.

3. Firmly push in the

primer 2 times with your

thumb, holding the

primer in for a second

before releasing it each

time.

m-6108

4. Pull the recoil

starter.

m-6109a

5. With the engine running, move the choke lever to

the left slowly.

Stopping the Engine

To stop the engine, turn the ignition key

counterclockwise to the Off position.

m-6192

Starting the Rotor Blades

To start the rotor blades, hold the control bar against

the handle.

m-6193

Stopping the Rotor Blades

To stop the rotor blades, release the control bar.

m-6118

Adjusting the Discharge

Chute

To adjust the discharge chute, move the chute handle

(A) and the chute deflector handle (B) as shown.

m-6107