Service Manual

Single Stage Snowthrower Service Manual 6 - 5

ELECTRIC START SYSTEM

6. Disconnect the spark plug wire from the spark

plug to prevent accidental starting.

7. On the starter, remove the top bolt on the upper

starter mounting plate (Figure 144).

Figure 144 1352-15

8. Remove the two screws on the handle holding the

lower shield in position (Figure 145).

Figure 145 1352-08

9. Remove the two nuts on the lower black cover

(Figure 146).

Figure 146 1854-05

10. Remove the three screws for the starter switch

box (Figure 147).

Figure 147 1854-37-2

11. Remove the starter wire mounting bracket.

(A) Top Bolt (B) Starter

(A) Nuts (B) Cover

(A) Switch Box Mounting Screws