Service Manual
SPECIFICATIONS & MAINTENANCE
2-5
Walk-Behind Rotary Broom Service Manual
MAINTENANCE SERVICE INTERVAL MAINTENANCE PROCEDURE
After the rst 2 hours
Check the traction cable.
Check the broom cable.
After the rst 5 hours Check the engine oil.
Before each use or daily
Check the engine oil level.
Check for loose hardware.
Check the broom shaft shear pin.
Every 50 hours
Check the tire pressure.
Check the condition of the belts.
Every 100 hours
Change the engine oil (more frequently in severe conditions).
Lubricate the broom angle lock pin.
Every 160 hours Check the spark plug.
Yearly
Check the traction cable.
Lubricate the hex shaft.
Check the broom cable.
Yearly or before storage
Check the air pressure in the drive tires and inate them to 116–137 kPa
(17–20 psi).
Drain the gasoline and run the engine to dry out the fuel tank and
the carburetor at the end of the season.
Inspect and replace the traction drive belt, if necessary.
Recommended Maintenance Schedule
Specications & Maintenance
2