Service Manual

Shift Lever
The shift lever on the control panel is connected to the
friction wheel in the traction drive by a shift rod. Moving
the shift lever moves the friction wheel to change wheel
direction and speed.
Shift Rod Adjustment
1. The adjustment point is a trunion on the upper end
of the shift rod.
CONTROLS
3-4
Walk-Behind Rotary Broom Service Manual
2. Pull the shift rod and arm upward as far as they will
go. With the shift lever in R2, adjust the trunion to
take the slack out and re-secure.
NOTE
Excessive slack in the linkage may cause the drive to be
in reverse when shifted into rst gear.
Auger Control
The bail on the right hand handle is the auger control.
Squeeze the bail and the cable causes an idler to pivot,
tensioning the auger belt.
Fig. 003
Fig. 004
Fig. 005
Fig. 006