Service Manual

BELT REPLACEMENT
4-3
Walk-Behind Rotary Broom Service Manual
BELT REPLACEMENT
Auger Belt Removal
1. Remove the belt cover.
2. Remove the belt guide. Be careful to avoid bending
the guide.
3. Remove the bolt securing the engine pulley to
the crankshaft. If necessary, you can hold the
hub between the pulley and engine to keep the
crankshaft from turning (A). Remove the pulley
sheave and the auger belt from the crankshaft.
4. The auger belt can now be removed from the
impeller pulley.
Fig. 002
Fig. 003
Fig. 004
Fig. 005
Belt Replacement
4
A