Service Manual

BELT REPLACEMENT
4-5
Walk-Behind Rotary Broom Service Manual
Traction Belt Removal
1. Remove the auger belt as outlined on page 4-3.
2. Slip the center section of the crankshaft pulley off
the crankshaft.
3. On the left side of the machine, remove the hairpin
cotter key from the speed control link.
Fig. 008
Fig. 009
4. Move the link to the side and let it rest in the saddle
provided. Reach down alongside the link and
remove the belt from the lower pulley. Then remove
the belt from the crankshaft pulley.
5. Reverse the process to install the belt.
Fig. 010
Fig. 011
Belt Replacement
4