Service Manual

TRACTION DRIVE SYSTEM

5-10

Walk-Behind Rotary Broom Service Manual

26. Remove the pivot pulley plate assembly from

the housing.

27. Remove the locknut from pivot pulley and separate

the pulley from the plate.

Drive System Assembly

1. Install the pivot plate assembly into the housing and

install the belt. The idler pulley (A) should be pushed

away from you to install the pivot plate.

2. Install the two bushings and the two “C” clips onto

the pivot plate shaft.

Fig. 032

Fig. 033

Fig. 034

Fig. 035

Fig. 036