Service Manual

TRACTION DRIVE SYSTEM
15. Position the hole for the hairpin cotter between the
two washers. Push the hairpin cotter into place.
Repeat for other side.
16. Lightly coat the 44-tooth gear with anti-seize.
17. Before installing the wheel clutch assembly, lightly
coat the 11-tooth gear of the wheel clutch with
anti-seize.
18. Install the wheel clutch assembly with the brace
shift plate facing away and up towards the housing,
making sure the collars are correctly installed with
the “RIGHT” and “LEFT” facing inward and the right
and left anges facing toward you.
19. Route the chains around the 32-tooth gear of the
clutch assembly.
Fig. 049
Fig. 050
Fig. 051
5-14
Fig. 052
Fig. 053
Walk-Behind Rotary Broom Service Manual