Service Manual

TRACTION DRIVE SYSTEM
5-16
Walk-Behind Rotary Broom Service Manual
23. Install the Z-bend of the clutch cable from outside to
inside of the shift collar.
24. Install the shift rod/traction rod lever onto the
housing making sure the traction control ts into the
friction wheel.
Fig. 058
Fig. 059
Fig. 060
25. Install the lower cover.
26. Install the upper and lower covers, with the upper
cover overlapping the lower cover.
27. Connect the shift linkage to the shift rod/traction
rod lever with a washer between the linkage and
hair pin.
Fig. 061
Fig. 062
Fig. 063