Service Manual

TRACTION DRIVE SYSTEM
5-21
Walk-Behind Rotary Broom Service Manual
9. Install the compression springs under the pawls.
10. Slide the thrust washer onto the 32-tooth
sprocket gear.
11. Slide the complete 32-tooth gear sprocket onto
the shaft.
Fig. 084
Fig. 085
Fig. 086
12. Install the at washer.
13. Make sure the 11-tooth gear slides on so it is ush
with the end of the shaft.
14. Make sure the pawls are up against the thrust
washer and the springs are not binding and are
compressing properly.
Fig. 087
Fig. 088
Traction Drive System
5