Operator's Manual

7.Removethedamagedbroomsegment(s).
8.Installthenewsegment(s)bystaggeringthemetalring
alignmentngersasshowninFigure35.
Important:Youmaydamagethebroomassembly
ifyoudonotproperlyinstallthebroomsegments.
9.Installthebroomassemblyontothemachine.
Important:Makesurethatthebearingsetscrews
aretightenedbeforeoperatingthebroom.
CheckingtheBroomCable
ServiceInterval:Aftertherst2hours
Yearly
1.Turnofftheengine,waitforallmovingpartstostop,
anddisconnectthespark-plugwire.
2.Removethebeltcoverandengineshield.
3.Withthebroomleverdisengaged,ensurethegap
betweenthebroom-clutchassemblyandthetabis3.2
mm(1/8inch).
Note:Ifthebroomisnotproperlyadjusted,referto
AdjustingtheBroomDrive(page25).
g019072
Figure36
1.Broom-clutchassembly
3.3.2mm(1/8inch)
2.Tab
AdjustingtheBroomDrive
Ifthebroomcableisnotproperlyadjusted;refertoChecking
theBroomCable(page25),andthenperformthefollowing
steps:
1.Loosenthejamnut(Figure37).
g001024
Figure37
1.Jamnut2.Turnbuckle
2.Loosenortightentheturnbucklethatadjuststhe
tensiononthecable(Figure37).
3.Adjusttheturnbuckleuntilthegapbetweenthebroom
clutchassemblyandthetabis3.2mm(1/8inch)
(Figure36).
4.Tightenthejamnut.
5.Ifthebroomcableisproperlyadjustedbutaproblem
remains,contactyourAuthorizedToroServiceDealer.
25