Operator's Manual

g326387
Figure47
1.Flange-headcapscrew
(1/4x5/8inch—loosen)
4.Flange(sideplate)
2.Bottomcover5.Rearcover
3.Flange-headcapscrew
(1/4x5/8inch)
6.Removethe6ange-headcapscrew(1/4x
5/8inch)thatsecurethebottomcovertothe
machine,andremovethecover(Figure47).
7.Slipthetractionbeltbetweenthefrictionwheel
andthetractionpulley,andremovethebeltfrom
themachine(Figure48).
g326386
Figure48
1.Frictionwheel3.Tractionpulley
2.Tractionbelt
InstallingtheTractionBelt
1.Slipthetractionbeltbetweenthefrictionwheel
andthetractionpulley,andintothemachine
(Figure49).
g326389
Figure49
1.Frictionwheel3.Tractionpulley
2.Tractionbelt
2.Atthetopofthemachine,alignthetractionbelt
intothegrooveofthetractionpulley,andslipthe
tractionbeltoverthecrankshaftoftheengine
(Figure50).
g326388
Figure50
1.Sheavehalf4.Shaftspacer
2.Tractionbelt87.6cm
(34-1/2inches)
5.Crankshaft(engine)
3.Pulleyspacer
3.Installthebroomdrivebelt;refertoInstallingthe
BroomDriveBelt(page28).
4.Atthebottomofthemachine,aligntheholesin
thebottomcoverwiththeholesintheangesof
theleftandrightsideplates(Figure51).
Note:Ensurethattherearcoveroverlapsthe
bottomcover.
29