Operator's Manual

Wheel-ClutchLevers
Thewheel-clutchleversarelocatedbelowtheright
andlefthandles.
Thewheelclutchleversallowthedrivetomomentarily
disengageto1orbothwheelswiththetraction-drive
leversqueezed.Thisallowsforeasierturningand
maneuveringthemachine(Figure6).
Note:Squeezingbothwheelclutchlevers
simultaneouslydisengagesthedrivetobothwheels
(free-wheeling).Thisenablesyoutomanuallymove
themachinebackwardwithoutstoppingtoshiftitinto
areversegear.Italsoallowsyoutomaneuverand
transportthemachinemoreeasilywhentheengine
isnotrunning.
g325105
Figure6
1.Wheel-clutchlever4.Traction-drivelever
2.Handle
5.Speed-selectorlever
3.Broom-anglelever6.Broom-drivelever
Broom-DriveLever
Thebroom-driveleverislocatedabovetheright
handle(Figure6).
Toengagethebroom,squeezethelevertothehandle.
Todisengagethebroom,releasetherightlever.
Traction-DriveLever
Thetraction-driveleverislocatedabovetheleft
handle(Figure6).
Thetraction-drivelevercontrolstheforwardand
reversemotionofthemachine.T oengagethetraction
drive,squeezethelevertothehandle.
Note:Holdingdownthetraction-driveleveragainst
thehandleengagesthetractiondrivetobothwheels.
Speed-SelectorLever
Thespeed-selectionleverislocatedonthemain
consolepanel(Figure6).
Thespeedselectorhas6forwardand2reverse
settings.Tochangespeeds,releasethetraction-drive
lever,andshiftthespeed-selectorlevertothedesired
setting.Theleverlocksinanotchateachspeed
setting.
Broom-AngleLever
Thebroom-angleleverislocatedattherighthandle
(Figure6).
Thebroom-anglelevercontrolstheanglelock.The
broomanglecanbelockedinto3positions:straight
ahead,orangledtotheleftorright19°.
Specications
Width
118cm(46.5inches)
Length
185.5cm(73inches)
Height
105.5cm(41.5inches)
Weight
151kg(333lb)
Enginespeed(noload)
Fullspeed:3600±100rpm
Fueltankcapacity
4.1L(1.0USgallon)
Attachments/Accessories
AselectionofT oroapprovedattachmentsand
accessoriesisavailableforusewiththemachine
toenhanceandexpanditscapabilities.Contact
yourAuthorizedServiceDealerorauthorizedToro
distributororgotowww.T oro.comforalistofall
approvedattachmentsandaccessories.
Toensureoptimumperformanceandcontinuedsafety
certicationofthemachine,useonlygenuineT oro
replacementpartsandaccessories.Replacement
partsandaccessoriesmadebyothermanufacturers
couldbedangerous,andsuchusecouldvoidthe
productwarranty.
8