Operator's Manual

InstallingtheBroomDriveBelt
Ownerprovidedmaterials:medium-strength
thread-lockingcompound
1.Assemblethewasheroverthecapscrew(3/8x
2inches),andapplyacoatofmedium-strength
thread-lockingcompoundtothethreadsofthe
capscrew.
2.Assemblethebelt96cm(37-1/4inch)intothe
grooveofthedriveshaftpulley(Figure45).
g326353
Figure45
1.Broom-drivepulleyand
belt96cm(37-1/4inch)
4.Pulleyspacer
2.Flatwasher5.Beltguide
3.Capscrew(3/8x2inches)
6.Flangecapscrew
3.Assemblethebeltintothegrooveofthe
broom-drivepulley(Figure45).
4.Assemblethebroom-drivepulleyontothepulley
spacer(Figure45).
Important:Alignthedrivekeysofthe
spacerwiththeslotsinthepulley.
5.Securethepulleyandspacertothedriveshaft
(Figure45)withthecapscrew(3/8x2inches).
6.Torquethecapscrewto42to52N∙m(31to39
ft-lb).
7.Assemblethebeltguidetotheenginewiththe
2angecapscrew(Figure45).
8.Torquethecapscrewsto23to29N∙m(17to21
ft-lb).
9.Installthebeltcover;refertoInstallingtheBelt
Cover(page26).
ReplacingtheTractionBelt
RemovingtheTractionBelt
1.Drainthefuelsystem;refertoDrainingtheFuel
System(page22).
2.Removethebeltcover;refertoRemovingthe
BeltCover(page26).
3.Removethebroom-drivebelt;refertoRemoving
theBroom-DriveBelt(page27).
4.Removethepulleyspacer,theforwardsheave
half,andtractionbelt87.6cm(34-1/2inches)
fromthecrankshaftoftheengine(Figure46).
g326388
Figure46
1.Sheavehalf4.Shaftspacer
2.Tractionbelt87.6cm
(34-1/2inches)
5.Crankshaft(engine)
3.Pulleyspacer
5.Atthebackofthemachine,loosenthe2top
ange-headcapscrew(1/4x5/8inch)that
securetherearcovertothemachine(Figure47).
28