Service Manual

CONTROLS

3-7

Walk-Behind Rotary Broom Service Manual

4. Reach under the shift plate and compress the small

ears on the cable tting. The cable tting can then

be pushed out of the shift plate.

5. Disconnect the lower end of the cable from the

shift collar.

Fig. 014

Fig. 015

Replacement

1. Feed the lower end of the cable through the shift

plate and snap the cable into the plate. Install the

lower end of the cable into the shift collar outside in.

2. Hook the upper end of the cable to the wheel clutch

lever and install the cable clamp to the handle.

3. Loosen the cable clamp nut.

Fig. 016

Fig. 017

Controls