Service Manual

3. Install the speed control linkage (B) through the pivot

plate and install the hairpin cotter (A) into the hole of

the speed control linkage on the outside of the

pivot plate.

4. Install the long end of the spring to the cut out on the

pivot plate.

5. Install the short end of the spring to the frame.

TRACTION DRIVE SYSTEM

5-11

Walk-Behind Rotary Broom Service Manual

6. Install the friction wheel assembly. Lay the shift

mechanism onto the housing and insert the shift

shaft into the friction wheel assembly in the

direction shown.

NOTE

It is important that the friction wheel and shift mechanism

are to the right of the unit as shown and that the wheel is

free of dirt, oil, anti-seize or any other lubricant.

Fig. 037

Fig. 038

Fig. 039

Traction Drive System