Service Manual

TRACTION DRIVE SYSTEM

28. The wheels are installed with the V-tread

rotation forward.

29. Bolt the wheel hub to the axle shaft and torque to

115 +/- 15 in - lbs (13 +/- 1.7 Nm).

30. Install the belt cover.

31. Check clutch cable adjustment and adjust

if necessary. Refer to “Traction Cable Adjustment”

on page 3-6.

Fig. 064

Fig. 065

Wheel Clutch Disassembly

1. Remove the 11-tooth gear from the 32-tooth gear by

sliding it off the shaft.

2. Slide off the washer behind the 11-tooth gear.

Fig. 066

Fig. 067

Walk-Behind Rotary Broom Service Manual

5-17

Traction Drive System