Service Manual
Table Of Contents
G210–1IgnitionCoilInstallation(continued)
g340731
Figure293
2.Routeandconnectthestopwiretothethrottlecontrolswitch.
3.Looselyinstallthe2(M6x25)screwssecuringtheignitioncoiltotheengine
block.Slidetheignitioncoiltotheendoftheslotawayfromtheywheel
andtightenthescrews.
g340492
Figure294
4.Usinganon-metallicfeelergauge,adjusttheairgapbetweentheignition
coilandtheywheelto0.4mm(0.016inch).Torquethescrews10N•m
(89in-lb).
•Rotatetheywheeltoalignthemagnetstobothlegsoftheignitioncoil.
Insertthefeelergaugebetweentheywheelandcoillegs.
•Loosenbothscrewsallowingthecoiltopinchthefeelergaugetothe
magnets.
•Tightenthe2screwsandremovethefeelergauge.
•Verifytheairgapistospecication.
G210EngineServiceManual
Page8–43
Electrical:ServiceandRepairs
3439-732RevA