Use and Care Manual
Table Of Contents
- NO TITLE
- NO TITLE
- .
- ? Installing the Upper Handle
- ? Installing the Wheel-Clutch-Cable Ends
- ? Installing the Traction-Control Linkage
- ? Installing the Chute-Control Rod
- ? Connecting the Headlight and Handwarmer Wires to the Engine
- ? Installing the Snow-Cleanout Tool
- ? Checking the Engine-Oil Level
- ? Checking and Adjusting the Tire Pressure
- ? Checking the Skids and Scraper
- ? Checking the Operation of the Traction Drive
- NO TITLE
- NO TITLE
- NO TITLE
- .
- Maintenance Safety
- Preparing for Maintenance
- Checking the Engine-Oil Level
- Checking and Adjusting the Skids and Scraper
- Checking and Adjusting the Traction Cable
- Checking and Adjusting the Auger/Impeller Cable
- Checking the Auger-Gearbox-Oil Level
- Changing the Engine Oil
- Lubricating the Hex Shaft
- Replacing the Spark Plug
- Adjusting the Discharge-Chute Latch
- Replacing the Drive Belts
- Replacing the Headlight Bulb
- NO TITLE
- NO TITLE
Maintenance
RecommendedMaintenanceSchedule(s)
MaintenanceService
Interval
MaintenanceProcedure
Aftertherst2hours
•Inspectthetractioncableandadjustitifnecessary.
•Inspecttheauger/impellercableandadjustitifnecessary.
Aftertherst5hours
•Changetheengineoil.
Beforeeachuseordaily
•Checktheengine-oillevelandaddoilifnecessary.
Every50hours
•Changetheengineoil.Changetheengineoilevery25operatinghourswhen
operatingtheengineunderaheavyload.
Every100hours
•Replacethesparkplug.
Yearly
•Checktheskidsandscraperandadjustthemifnecessary.
•Inspectthetractioncableandadjustorreplaceitifnecessary.
•Inspecttheauger/impellercableandadjustorreplaceitifnecessary.
•Checktheauger-gearboxoilandaddoilifnecessary.
•Lubricatethehexshaft.
Yearlyorbeforestorage
•Checktheairpressureinthetiresandinatethemto116to137kPa(17to20psi).
•Runtheenginetodryoutthefueltankandthecarburetorattheendoftheseason.
•HaveanAuthorizedServiceDealerinspectandreplacethetractiondrivebeltand/or
theauger/impellerdrivebelt,ifnecessary.
Important:Youcanndmoreinformationaboutmaintainingandservicingyourmachineat
www.Toro.com.
MaintenanceSafety
Readthefollowingsafetyprecautionsbefore
performinganymaintenanceonthemachine:
•Beforeperforminganymaintenance,service,or
adjustment,shutofftheengineandremovethe
key.Ifmajorrepairsareeverneeded,contactan
AuthorizedServiceDealer.
•Checkallfastenersatfrequentintervalsforproper
tightnesstoensurethatthemachineisinsafe
workingcondition.
•Donotchangethegovernorsettingsontheengine.
•PurchaseonlygenuineT ororeplacementparts
andaccessories.
PreparingforMaintenance
1.Movethemachinetoalevelsurface.
2.Shutofftheengineandwaitforallmovingparts
tostop.
3.Disconnectthespark-plugwire.Referto
ReplacingtheSparkPlug(page23).
18