Use and Care Manual
Table Of Contents
- NO TITLE
- NO TITLE
- .
- ? Installing the Upper Handle
- ? Installing the Wheel-Clutch-Cable Ends
- ? Installing the Traction-Control Linkage
- ? Installing the Chute-Control Rod
- ? Connecting the Headlight and Handwarmer Wires to the Engine
- ? Installing the Snow-Cleanout Tool
- ? Checking the Engine-Oil Level
- ? Checking and Adjusting the Tire Pressure
- ? Checking the Skids and Scraper
- ? Checking the Operation of the Traction Drive
- NO TITLE
- NO TITLE
- NO TITLE
- .
- Maintenance Safety
- Preparing for Maintenance
- Checking the Engine-Oil Level
- Checking and Adjusting the Skids and Scraper
- Checking and Adjusting the Traction Cable
- Checking and Adjusting the Auger/Impeller Cable
- Checking the Auger-Gearbox-Oil Level
- Changing the Engine Oil
- Lubricating the Hex Shaft
- Replacing the Spark Plug
- Adjusting the Discharge-Chute Latch
- Replacing the Drive Belts
- Replacing the Headlight Bulb
- NO TITLE
- NO TITLE
x 3
1
2
3
4
5
120-9805
decal120-9805
120-9805
1.Insertthekey.
2.Primetheengine3times.
3.Engagethechoke.
4.Pullthestartercord.
5.Oncetheengineisrunning,disengagethechoke.
decal125-1102
125-1102
1.Engine—shutoff
3.Variablespeedcontrol
2.Slow
4.Fast
decal127-5991
127-5991
1.Leftturncontrol4.Cutting/dismembermenthazard,
impeller—donotplaceyourhandin
thechute;shutofftheenginebefore
leavingtheoperator'spositionanduse
atooltoclearthechute.
7.Auger/impellerdrive—squeezethe
levertoengage;releasetheleverto
disengage.
2.Tractiondrive—squeezetheleverto
engage;releasethelevertodisengage.
5.Cutting/dismembermenthazard,
impeller—stayawayfrommoving
parts;keepallguardsandshieldsin
place;removetheignitionkeyand
readtheinstructionsbeforeservicing
orperformingmaintenance.
8.Rightturncontrol
3.Warning—readtheOperator'sManual.
6.Thrownobjecthazard—keep
bystandersasafedistanceawayfrom
themachine.
9.Handwarmercontrols
4