06-5901 Rev: MSDS - OIL D Release/Change Authorization Number: Issue Date : Created By : Supersedes: Superseded by: Scale : Material Safety Data Sheet 5053821 8/20/2009 M.ZENNER None THIS UNPUBLISHED DOCUMENT CONTAINS TORO CONFIDENTIAL AND PROPRIETARY INFORMATION. IT MAY NOT BE WHOLLY OR PARTIALLY COPIED, DISCLOSED TO OTHERS, OR USED FOR ANY PURPOSE WITHOUT WRITTEN PERMISSION FROM TORO. IF PUBLICATION OCCURS, THE FOLLOWING NOTICE APPLIES: “© TORO ALL RIGHTS RESERVED”.
Material Safety Data Sheet The Toro Company 8111 Lyndale Ave S Bloomington, MN 55420 Revision Date: 2/8/2009 Issue Date: 8/8/2009 Product Identification Product Name: Toro 4 Cycle Oil (SAE 5W-30 Winter Weight) Parts Number: Product type: MSDS # Emergency Contact: Contact Number: Oil 625703417 Chemtrec : 1-800-424-9300 505-157, 77-4910, 92-8631, 100-3592, 38912, 38915,89885 1-952-888-8801 Chemical Components Chemical CAS # % Distillates, petroleum, hydrotreated heavy paraffinic Distillates, pet
HMIS Rating Health: 0 Flammability: 1 Physical Hazard: 0 Vapor density >1 (Air = 1) Evaporation rate Not available. Solubility in water VOC content: Flash Point Negligible solubility in cold water. Additional Properties Open cup: 244°C (471°F) (Cleveland.). Gravity, ºAPI (ASTM D287) = 32.8 @ 60º F Density = 7.17 Lbs/gal.
by a qualified professional pursuant to OSHA regulations. The following pictograms represent the minimum requirements for personal protective equipment. For certain operations, additional PPE may be required. lowering eyelids. Seek medical attention if excessive tearing, redness, or pain persists. Skin Contact: If burned by hot material, cool skin by quenching with large amounts of cool water. For contact with product at ambient temperatures, remove contaminated shoes and clothing.
dioxide or inert gas in confined spaces. above the flash point temperature that can ignite when exposed to a source of ignition. In enclosed spaces, heated vapor can ignite with explosive force. Mists or sprays may burn at temperatures below the flash point.
NOT pressurize, cut, weld, braze, solder, drill, grind, or expose this product's empty container to heat, flame, or other ignition sources. DO NOT attempt to clean it. Empty drums and pails should be drained completely, properly bunged or sealed, and promptly sent to a reconditioner. not been established for this material.
ORAL (LD50): Acute: >5000 mg/kg [Rat]. DERMAL (LD50): Acute: >2000 mg/kg [Rabbit]. Mineral oil mists derived from highly refined oils are reported to have low acute and sub-acute toxicities in animals. Effects from single and short-term repeated exposures to high concentrations of mineral oil mists well above applicable workplace exposure levels include lung inflammatory reaction, lipoid granuloma formation and lipoid pneumonia.