Operator's Manual
FOR USE ON A TOW VEHICLE
©The Toro Company -2000
All Rights Reserved
OPERATORS,
SET-UP AND PARTS
CATALOG
FORM NO.99-0808
MODEL NO. 40792
80T TRAILER SPRAYER
To assure maximum safety, optimum
performance, and to gain knowledge of the
product, it is essential that you or any other
operator of this Vehicle read and understand
the contents of this manual before the engine
is ever started. Pay particular attention to the
SAFETY INSTRUCTIONS highlighted by the
triangular safety alert symbol.
instruction. Failure to comply with the
instruction may result in personal injury.
SAFETY INSTRUCTIONS
Keep this Manual in the plastic tube located on the frame. It is very important that all persons operating
this equipment have easy access to these instructions at all times! Carefully read and follow the Safety
And Set-Up Instructions that are provided with this equipment.
RECOGNIZE SAFETY INFORMATION
This safety-alert symbol is used to call
attention to a dangerous situation, which
could result in serious injury or death to the
operator or a bystander.
Safety, mechanical and some general information
in this manual are emphasized. DANGER,
WARNING and CAUTION identify safety
messages. Whenever the triangular safety
symbol appears, it is followed by a safety
message that must be read and understood. For
more details concerning safety, read the Safety
Instructions on this page and pages 2 & 3.
IMPORTANT identifies special mechanical
information and NOTE identifies general
information worthy of special attention.
These instructions are provided as a guide for the
safe operation and maintenance of this equipment.
However, the operators personal safety, as well
as those persons in the work area, will depend on
the careful actions and good judgement of the
operator. To reduce the potential for injury or
death, comply with the following safety
instructions.
BEFORE OPERATING:
1. Operate this machine only after reading and
understanding the contents of this manual. This
equipment should not be modified without The
Toro Company's authorization. A replacement
manual is available by sending complete model
and serial number to:
Hahn Equipment Co., 1625 N. Garvin, Evansville,
IN 47711.
The safety alert symbol means CAUTION,
WARNING or DANGER - personal safety
2. Learn how to operate the Sprayer and how to
use the controls properly. DO NOT let anyone
operate this equipment without first receiving
thorough instructions.
3. Keep all shields, safety devices and decals in
place. If a shield, safety device or decal is
malfunctioning, illegible or damaged, repair or
replace it before operating the machine.
4. Chemicals can injure persons, animals,
plants, soils or other property. To eliminate
environmental damage and personal injury:
A. Obtain proper training before using or
handling chemicals.
B. Select the proper chemical for the job.
C. Follow manufacturers instructions on
chemical container labels. Apply and handle
chemicals as recommended.
D. Handle and apply chemicals with care.
Wear goggles and other necessary protective
equipment. Handle chemicals in well ventilated
areas. Never smoke while handling chemicals.
E. Properly dispose of chemical container
and unused chemicals.
5. To be sure of optimum performance and
safety, always purchase genuine Toro replacement
parts and accessories. Replacement parts and
accessories made by other manufacturers could
be dangerous. Altering this equipment in any
manner may affect the machines operation,
performance, durability or its use may result in
injury or death. Such use could void the product
warranty of The Toro Company.