FORM NO. 92-0080 SET-UP AND MODEL NO. 41012 PARTS LIST t DIGITAL SPEEDOMETER KIT J Fi OR USE ON THE MULTI-PRO 1100 & 5200 VEHICLES Pages 3 thru 7 of the CAL-AN-ACRE's “Installation/Operator’s Manual® are the generalized instructions for the installation of the CAL C-ANACRE.
MOUNTING THE MAGNETIC SENSOR: MAGNET The magnet clip (in parts bag} has been modified for use on the MULTI-PRO Vehicle. See FIG. 3. MAGNET CLIP W Place the magnet against the stop at the end of the clip (longest dimension of magnet should be turned in the direction of turning wheel. ® Attach the magnet to the clip using epoxy or similar high (duality adhesive. Use a cable tis to further secure the magnet to the clip and help prevent the FIG. 3 magnate from being dislodged by field debris.
FOR . 82-0080 P MNO. 92 CALEANACRE® Do Ed BEEBE REF PART NO. . DESCRIPTION QTY 1 20-5-AD HHS, caveats . 3 2 Lock Washer, 1/4% iuiveinonnanensin . 3 3 22-11-AD Hex Nut, 1/4% NC . 3 4 95672 Cable Til.uaveirsvaeroranonnanes AR 5 82-0120 Peed Sensor Mounting 1 6 92.0122 GAMBLING L iveureuvtasannsnanvrvarnunasons 1 7 92~0121 Magnet Clip..cvieevernunnsnannenn, 1 8 HHS, 7716 NC % 3/4% ..
FOR USE ON THE MULTI-PRO 1100 VEHICLE MOUNTING THE DISPLAY CONSOLE: % Remove the mounting bracket from the console by unscrewing knobs at each side. ® Set rubber washers and knobs aside. ® Remove the knock-out plug from the upper corner of the Vehicle console and insert a 1/4* bolt through the mounting bracket and into the console. Use the bracket as a template and drill a 9/32¢ dia. hole in the console. Secure the bracket to the console with 1/4" bolts, lock washers and nuts. See FIG.
MOUNTING THE MAGNETIC SENSOR: The magnet ¢lip (in parts bag) has been modified for use on the MULTI-FRO Vehicle. See FIG. §. ® Place the magnet against the stop at the end of the clip (lunges dimension of magnet should be turned in the direction of turning wheel. ™ Attach the magnet to the clip, using epoxy or similar high quality adhesive. Use a cable tie to further secure the magnet to the clip, to help prevent the magnet from being dislodged by field debris.