MODEL NO. 41029 30001 & Up FORM NO. 92-3738 SET-UP AND PARTS SUIT 1. install the Toto Electric Clutch Kit and Spray System as per instructions with those kits. 2..Raise. the tank and skid assembly and support with the strut support rod. 3. Remove the {4) 3/8" x 1* hex hd. cap screws and {2} nuts securing the radiator cover to vehicle frame and remove radiator cover. 4. Unplug the wire heiress connectors from both headlights. 5.
FIG. 2 1. Electric Actuator 2. Strut Ass'y 18. Make a trial connection by plugging single terminals into the Actuator plug, te check the up and down motion and the right and left control. 19. Temporarily connect the bite wire from the harness to the red wire in the right actuator plug and connect the white wire from the harness to the yellow wire in the right actuator plug. 20.
ELECTRIC BOOM LIFT KIT SPRAY BOOM CONTROL LEFT UP RIGHT o!e@ P EE ELEV. BOOM Kruger 92:2664 REF. PART NO. DESCRIPTION 1 28-28-D Hale Pin Cotter, Boom Frame) 2 42195 Clevis Pin, 1/2 x 2* ({/w Boom Frame) 3 923757 Actuator Assembly 4 30854 Switch 5 30955 Rubber Boot 6 92-2660 Decal Spray Boom 92-2664 Decal Electric Boom . .. * 92-3737 Wire Harness Assembly . . * 42765 B0ampFuse 95672 Plastic Sta-Strap .. * indicates Parts furnished, but not shown.
92-3757 ACTUATOR SIS ] QO REF PART NO. DESCRIPTION aTY 1 92-3854 Boot KE (includes Clamps) ive £2-9850 Cover Tube 1 3 92-2853 Drive Screw Assembly . o1 4 420850 Frost Housing 82-3852 Clutch Assembly . PR 6 82-3851 Rear Housing . | 7 42849 Motor .
