FORM NO. 92-0381 MODEL NO. 41030 30001 & Up ELECTRIFICATION Refer 1o the illustrated Pants List for the details of parts used in assembling the Electric Boone Lift Kit, NOTE: “Right", “Left", "Front" and “Rear" are referenced while seated in the operator's position. 1. i the Struts have been installed, {for use with a Manual Boom Frame) disassemble them and use the clevis pins and hair pin cotters to install the Electric Actuators as shown in FIG. 1. 2.
RIGHT SWATH W TO YELLOW O RIVE th % o wiring diagram e ri ACTUATOR TO RED WIRE It ACTUATOR PLUG Yellow TO RED WIRE IR ACTUATOR PLUG LEFT TG YELLOW ACTUATOR 3. Run the Wire Ha mess along the left side of 5. Connect the push-on terminal on the red wire the Vehicle's Main Frame. 1o the male terminal on the red wire coming from the Fuse Block. See FIG. 4. 4. Ground the spade terminal on the black wire to the Ground Terminal Block.. See FIG. 4. 6.
ELECTRIC BOOM LIFT KIT SPRAY BOOM s L REF PART NO. DESCRIPTION 28-28-D 42195 92-3757 30954 30955 87-0610 43063 42765 95672 *F ADAPTION ~ Hair Pin Cotter, 1/8 x 1" (FWIW Boom Frame) Clevis Pin, 1/2 x 2" (ffw Boom Frame) . .. .. Actuator Assembly Switch Rubber Boot . Decal Wire Ha mess Assembly .. .. 3-ampFuse Plastic Sta-Strap . Indicates parts furnished, but not shown.
92-3757 ACTUATOR & REF PART NO. DESCRIPTION ary 1 02.3884 Boot Kit {(includes clamps) 92-8850 Cover Tube 1 8 92-2858 Drive Screw Assembly . 1 4 42850 Front Housing 923852 Clutch Assembly 1 € 92-2851 Rear Housing . 1 7 42848 Motor 1 8 42852 Motor Pinion (ear | 1 g 42846 Intermediate Gear .
