Installation Instructions

4
Installing the Kit on an 1100 or
5200 Sprayer
To install this kit on an 1100 or 5200 sprayer, you will need
to order the following parts, in addition to this kit:
• 2 Switches, part number 30954
• 2 rubber boots, part number 30955
• Wire harness, part number 43063 (Use in place of the
wire harness supplied with the kit.)
• Decal, part number 87–0610
1. Install the switches and rubber boots in the locations
illustrated in Figure 5 (1100 sprayer) or Figure 6 (5200
sprayer).
m–6358
1
Figure 5
1. Switches
m–6359
1
Figure 6
1. Switches
2. Install the decal between the two switches.
3. Proceed with step 3 on page 2.