Operator's Manual

16
FILLING THE SOLUTION TANK:
IMPORTANT: Follow the chemical
manufacturer's instructions for mixing spray
solution to obtain desired application rate. Do
not add chemical to Tank until just before use.
The concentrate should not be poured into an
empty Tank: Fill tank about 3/4 full with clean
clear water. With agitation ON, add chemical
concentrate slowly and finish filling Tank with
water. Dispose of excess chemicals, solution
and containers, per chemical manufacturer's
instructions.
Premix wettable powders in one or two 5-gallon
containers. Then slowly add premix to 3/4 tank of
clean clear water with agitation ON.
CAUTION
CHEMICALS ARE HAZARDOUS AND CAN
CAUSE PERSONAL INJURY!
Carefully read the directions printed on
the chemical manufacturer's labels be-
fore handling chemicals. Instructions on
chemical manufacturer's container la-
bels, regarding mixing proportions,
should be read and strictly followed.
Keep spray material away from skin. If
spray material comes in contact with
body, wash it off immediately with clean
water and detergent.
Always wear goggles and other
personal protective equipment as
recommended by the Chemical
Manufacturer.
BEFORE SPRAYING