Operator's Manual

ManualsBrandsToro ManualsAttachmentsPro Control Spray System, Multi-Pro 5600 and 5700-D Turf Sprayer

SAFETY INSTRUCTIONS

WHILE OPERATING

5. Make certain everyone is clear of the

machine before starting the engine to move

the vehicle or before engaging the Sprayer

Pump.

6. If equipment begins to vibrate abnormally,

stop immediately. Shut off the vehicle engine

and disengage all power. Repair all damage

before commencing operation.

MAINTENANCE

7. Before servicing or making any

adjustments to the Sprayer:

A. Stop the Vehicle and set the parking

brake.

B. Shut off the Vehicle's engine and remove

key from ignition.

C. Disengage all power and wait until all moving

parts have stopped.

8. Keep all nuts, bolts and other fasteners

tightened securely. Replace any shields removed

during servicing or adjustments.

9. To be sure of optimum performance and safety,

always purchase genuine TORO replacement

parts and accessories. Replacement parts and

accessories made by other manufacturer's could

be dangerous. Altering this equipment in any

manner may affect the machine's operation,

performance, durability or its use may result in

injury or death. Such use could void the product

warranty of the TORO Company.

INTRODUCTION

The Toro Pro-Control Spray System is designed to improve the accuracy and uniformity of spray

applications. Its performance relies on the correct installation and preventive maintenance of the complete

Sprayer. This Manual provides a simple step-by-step procedure for operating the Toro Pro-Control

Spray System.

The Toro Pro-Control System consists of a computer based Control Console, a Speed Sensor, and a

Turbine Type Flow Meter. Appropriate cabling is furnished with Vehicle for installation. The operator sets

the target volume per area to be sprayed and the Control Console automatically maintains the flow

regardless of vehicle speed. A manual override switch allows the operator to manually control flow for

system check out and spot spraying. Actual volume per area being applied is displayed at all times. The

Pro-Control Spray System additionally functions as an area monitor, speed monitor and volume totalizer.

This Toro Pro-Control System is designed to work with the diaphragm pump and bypass boom valves.

The Pro-Control system has been designed to operate with the boom by-pass valves closed. Before

trying to operate the spray system with this Toro-Pro-Control, close all by-passes on your boom valves.

Close the by-passes on your boom valves by turning the red knob at the bottom of the boom valves

clockwise as far as they will turn.

1. Roll Pin 3. Distribution Valve ASM

2. Boom Bypass Valve 4. Adjustment Knob

1796-5600