Form no. 82-3646 MODEL NO. 41096 30001 & UP Ofnfiflg_fl s HOSE REEL KiT for the WORKMAN®SPRAY SYSTEM maximum performance, and to ingrain knowledge of the To assure safety, optimum A The safety alert symbol means CAUTION, WARNING, or DANGER personal safety instruction. Allure to comply with the instruction may result In personal injury. product, it is essential that you or any other operator of this equipment read and understand the contents of this manual before the vehicle engine is ever started.
SAFETY INSTRUCTIONS 5. Make certain everyone is clear of the machine and work site before starting the engine and beginning to spray. WHILE OPERATING: 6. This attachment adds extra weight to the vehicle. Drive the vehicle safely. A. Always slow the vehicle when approaching and while making a turn. B. Always slow the vehicle when changing the direction of travel or preparing to stop. C. When fuming or driving on slopes, always slow the vehicle, then tum the vehicle. D.
CONTROLS and OPERATION HOSE REEL SWITCH (FIG. 1): Activates the hose reel miter which spins the hose reel. HOSE REEL VALVE HANDLE (FIG. 1) Opens and closes hose reel naive to open up ar shut off the supply of spray liquid to the hos real. 2. Hose Reel Valve Handle 1. Hose Reel Switch OPERATION: WINDING HOSE ONTO REEL: NOTE: Be aware that the reel switch is an ON/OFF switch and does NOT control the speed of the winding action.
SERVICE " 2. Move motor mounting bracket and motor until proper chain tension is achieved. 3. Tighten all of the motor mounting bracket bolts securely. SERVICE INSTRUCTIONS: CAUTION To avoid personality, keep hands clear of the chain drive system until all wore is removed from the reel motor. remove the battery wire from the vehicle battery's positive post before attempting any repairs or adjustments. CHAIN REPLACEMENT: 1. Disconnect the battery wire from the vehicle battery's positive post. 2.
SERVICE 5. Remove the (4) 5/16" x 1/2° hex hd cap screws and news securing motor mounting bracket and moor to hose reel. Remove bracket and motor (FIQ. 3. 6. Remove the (4) 5/16" x 1/2° hex hd cap screws and flat washers securing the motor mounting bracket to motor. Remove motor. 7. Loosen the (2) setscrews on the motor sprocket and remove sprocket and key from motor shaft. 8. Install sprocket and key earlier removed on new motor shaft and secure by tightening the (2) setscrews securely, 9.
The Toto Promise A One Year Limited Warranty The Toto Company promises to repair your model 41096 Hose Reel for the Workman vehicle if defective in materials or workmanship. The following time periods from the date of purchase apply special warranty terms, on certain components, may be offered through The Tore Company by the component manufacturers): Commercial Products Ceremoniousness 1 Year The cost of parts, labor and transportation are included.