FORM NG, 42900 MODEL NO. 41124 OPERATOR’ INSTRUCTIONS FOAM MARKER KIT for use on the MULTI-PRO™ 1100 VEHICLE To assure maximum safety, optimum performance, and to gain knowledge of the product, it is essential that you or any other operator of this equipment read and understand the contents of this manual before the vehicle engine is ever started.. Pay particular.attention to the SAFETY INSTRUCTIONS highlighted by the triangular safety alert symbol.
SAFETY INSTRUCTIONS AND DECALS WHILE OPERATING: 5. Make certain everyone is clear of the machine before starting the engine. 6. if equipment begins to vibrate abnormally, stop immediately. Shut off the vehicle engine and disengage all power. Repair all damage before commencing operation. 7. Before servicing or making any adjustments 1o the Foam Marker: A Stop the vehicle and set the parking brake. B. Shut off the vehicle’s engine and remove key farm ignition. C.
OPERATION 1. Ensure the ON/OFF switch Is in the OFF position, A caution The contents of the Foam Marker Tank are under pressure. Loosening fittings under this condition could result in contents spraying into eyes. To relieve pressure from the Tank, switch the On/Off switch to OFF and, direct the foam to the right or left boom using the Foam Control Switch. 2. Loosen union and remove the Foam Control Valve and Hoses trim top of the solution tank. 3. Pour approximately 1 gal.
The Toto Promise A One Year Limited Warranty The Tore Company promises 1o repair your Model 41124 Foam Marker Kit for the Multipro™ 1100 Vehicle # defective in materials or workmanship. The following time periods from the date of purchase apply special warranty terms, on certain components, may be offered through The Toto Company by tha component manufacturers: Commercial Counterproductive 1 Year The cost of parts, labor and transportation are included.
