Operator's Manual

1
To assure maximum safety, optimum
performance, and to gain knowledge of the
product, it is essential that you or any other
operator of this equipment read and
understand the contents of this manual
before the vehicle engine is ever started. Pay
particular attention to the SAFETY
INSTRUCTIONS highlighted by this symbol
A. Obtain proper training before
using or handling chemicals.
B. Select the proper chemical for the
job.
©The TORO Company - 2002
All Rights Reserved
FORM NO. 104-9071
The safety alert symbol means
CAUTION, WARNING, or DANGER
personal safety instruction. Failure to
comply with the instruction may result in
personal injury.
It is very important that all persons operating this equipment have easy access to these instructions at
all times.
RECOGNIZE SAFETY INFORMATION
This safety-alert symbol calls attention to a dangerous situation, which could result in serious
injury or death to the operator or a bystander.
Safety, mechanical and some general information in this manual are emphasized. DANGER, WARNING
and CAUTION identify safety messages. Whenever the triangular safety symbol appears, it is followed
by a safety message that must be read and understood. For more details concerning safety, read the
Safety Instructions that follow. IMPORTANT identifies special mechanical information and NOTE
identifies general information worthy of special attention.
These instructions are provided as a guide for the safe operation and maintenance of this equipment.
However, the operators personal safety, as well as those persons in the work area, will depend on the
careful actions and good judgement of the operator.
To reduce the potential for injury or death, comply with the following safety instructions.
SAFETY INSTRUCTIONS
BEFORE OPERATING:
1. Operate this attachment only after reading
and understanding the contents of this manual.
A replacement manual is available by sending
complete model and serial number to: Hahn,
Inc., 1625 N. Garvin, Evansville, IN. 47711.
2. Learn how to operate the Hand Sprayer Kit
and how to use the controls properly. DO NOT
let anyone operate this equipment without first
receiving thorough instructions.
3. Chemicals can injure persons, animals,
plants, soils or other property. To eliminate
environmental damage and personal injury:
C. Follow manufacturers instructions on
chemical container labels. Apply and handle
chemicals as recommended.
D. Handle and apply chemicals with care.
Wear goggles and other necessary protective
equipment. Handle chemicals in well
ventilated areas. Never smoke while
handling chemicals.
E. Properly dispose of chemical container
and unused chemicals.
OPERATORS,
SET-UP & PARTS
MANUAL
HOSE REEL KIT and HAND SPRAYER KIT
for the MULTI-PRO
TM
1200 and 1250
MODEL NO. 41134-220000101 & UP
4. DO NOT aim Hand Sprayer at any person
or any animal. Fluids under high pressure can
penetrate the human skin and can cause severe
injury, possibly resulting in amputation or death.
Hot liquids and chemicals can also cause burns
or injury. If any part of the body comes in contact
with the spray stream, immediately consult a
physician.
5. DO NOT at any time place hand or any
other part of the body in front of spray nozzle or
tip.