Operator's Manual

ManualsBrandsToro ManualsAttachmentsOperator Enclosure, Multi-Pro 1100

Model No. 41183-90001 & UP

©The TORO Company - 1999

FORM NO.93-6201

OPERATOR ENCLOSURE

for the MULTI-PRO

1100 Vehicle

OPERATOR’S

INSTRUCTIONS

To assure maximum safety, optimum

performance, and to gain knowledge of the

product, it is essential that you or any other

operator of this Vehicle read and understand

the contents of this manual before the engine

is ever started. Pay particular attention to the

SAFETY INSTRUCTIONS highlighted by the

triangular safety alert symbol.

SAFETY INSTRUCTIONS

Keep this Operator’s Manual in the plastic tube behind the operator seat.

It is very important that all persons operating this equipment have easy access to these instructions at

all times!

Carefully read and follow the “Installation Instructions” that are provided with this equipment and the

Safety Instructions in the Multi-Pro

Operator’s Manual.

RECOGNIZE SAFETY INFORMATION

This safety-alert symbol is used to call

attention to a dangerous situation, which

could result in serious injury or death to

the operator or a bystander.

Safety, mechanical and some general

information in this manual are emphasized.

DANGER, WARNING and CAUTION identify

safety messages. Whenever the triangular safety

symbol appears, it is followed by a safety

message that must be read and understood. For

more details concerning safety, read the Safety

Instructions on this page and page 2.

IMPORTANT identifies special mechanical

information and NOTE identifies general

information worthy of special attention.

These instructions are provided as a guide for the

safe operation and maintenance of this

equipment. However, the operator’s personal

safety, as well as those persons in the work area,

will depend on the careful actions and good

judgement of the operator. To reduce the

potential for injury or death, comply with the

following safety instructions.

BEFORE OPERATING:

1. Operate this equipment only after reading

and understanding the contents of this manual.

A replacement manual is available by sending

complete model and serial number to: Hahn,

Inc., 1625 N. Garvin, Evansville, IN 47711.

2. Learn how to use the controls properly. DO

NOT let anyone operate this equipment without

first receiving thorough instructions.

3. Fasten your Seat Belt. Have Face Mask on.

4. Chemicals can injure persons, animals, plants,

soils or other property. To eliminate environmental

damage and personal injury:

The safety alert symbol means CAUTION,

WARNING or DANGER - personal safety

instruction. Failure to comply with the

instruction may result in personal injury.

A. Follow manufacturer's instructions on

cheicals as recommended. Apply and handle

chemicals as recommended.

B. Handle and apply chemicals with care.

Wear goggles and other necessary protective

equipment. Handle chemicals in well ventilated

areas. Never smoke while handling chemicals.

C. Properly dispose of chemical container

and unused chemicals.

Summary of content (8 pages)

PAGE 1
FORM NO.93-6201 Model No. 41183-90001 & UP OPERATOR’S INSTRUCTIONS OPERATOR ENCLOSURE for the MULTI-PROTM 1100 Vehicle To assure maximum safety, optimum performance, and to gain knowledge of the product, it is essential that you or any other operator of this Vehicle read and understand the contents of this manual before the engine is ever started. Pay particular attention to the SAFETY INSTRUCTIONS highlighted by the triangular safety alert symbol.
PAGE 2
5. Make certain everyone is clear of the machine and work site before starting the engine and beginning to spray. 7. Keep all nuts, bolts and other fasteners tightened securely. Replace any shields removed during servicing or adjustments. MAINTENANCE: 8. To be sure of optimum performance and safety, always purchase genuine TORO replacement parts and accessories. Replacement parts and accessories made by other manufacturers could be dangerous.
PAGE 3
CONTROLS: OPERATION: BLOWER FAN KNOB: Controls the Blower Fan Speed. See FIG. 1. 1. Check the Blower Filter before beginning the day's operation. Clean if necessary, as directed in the "MAINTENANCE" section. BLOWER VENT CONTROL: Rotate or turn the vanes to direct the air flow in the direction desired. The recommended direction is towards head and neck of the operator. 2. Have Safety Belt Fastened! Check to be sure Doors are closed securely. Have Face Mask on.
PAGE 4
IMPORTANT! The Front Window is scratch resistant. The Side and Rear windows will scratch. CLEANING WINDOWS: Rinse with mild soap or detergent and lukewarm water. Use a soft cloth or cellulose sponge. DO NOT SCRUB or use brushes or squeegees. WIPER ARM ADJUSTMENT: To adjust the length of the Wiper Arm, open the extension lock as shown in FIG. 3. Adjust to the desired length and close the extension lock to secure the extension in place. Rinse again.
PAGE 5
PAGE 6
® 6
PAGE 7
® 7
PAGE 8
The Toro Commercial Products Two Year Limited Warranty The Toro Company warrants your 1996 or newer Toro Commercial Product (“Product”) purchased after January 1, 1997, to be free from defects in materials or workmanship for the period of time listed below. Where a warrantable condition exists, Toro will repair the Product at no cost to you including diagnosis, labor , parts, and transportation. This warranty begins on the date the Product is delivered to the original retail purchaser.