Installation Instructions

Figure21
1.Switch,withnotchinthe
rear
3.Switchbody,rotated180°
2.Removethecover4.Installcover,notchinthe
front
C.Holdingtheswitchcoverinposition,ipthe
switchbody180degreessothattheconnector
notchisfrontleftcorner(Figure21).
D.Presstherockerswitchcoversontotheswitch
bodiesinthisneworientationuntilthecover
snapsintoplace(Figure21).
E.Installtheswitchestothereoriginalpositionin
thecontrolpanel.
Note:Ensurethattheorientationoftheswitch
iswiththenotchpointingtowardthetopleftof
thecontrolbox.
WiringtheSwitchesandIndicatorLight
1.Cutandremovetheexistinggrommetinthebaseof
thecontrolpanel.Discardthegrommet.
Important:Takeprecautionsnottocutthe
existingwiresandharnesswhencuttingoutthe
existinggrommet.
2.Routethefreeendofthewiringharnessupthrough
theopeninginthecontrolpanelkeepingthebranch
withtheringterminaloutsidethecontrolpanel.
3.Splitthenewgrommetincludedinthekitandwrap
thearoundthewiringharnessatthebaseofthe
controlpanel.Installthegrommetstothebaseof
controlpanelinplaceofthegrommetremoved
previously.
4.Connecttheconnectorwithgreen/white,
green/black,andblackwirestothebottomofthe
rightboomliftswitch.
5.Connecttheconnectorwithblue/white,blue/black,
andblackwirestothebottomoftheleftboomlift
switch.
6.Connecttheconnectorwithpurple,white,yellow,
andblackwirestothebottomofthesonicboom
switch.
7.Connectthelightindicatortothewiringharness
withtwospadeconnectors.
8.Installthefrontcontrolpanelcovertothecontrol
boxusingthefastenersremovedpreviously
(Figure19).
9.Routetheremainderoftheharnessrearward,along
theexistingsprayerharnesstorearofthemachine.
Usecabletiestosecuretheharnesses.
ConnectingtheWiringtotheFuseBlock
1.Locatethebranchofthewiringharnesswiththe
ringterminalsandrouteitunderthedashtothefuse
blockarea.
2.Connecttheringontheblackwiretotheground
bolt(Figure22).
Figure22
1.Fuseblock4.Blackwire
2.Redwire,fromharness5.Groundbolt
3.Correspondingwire,from
fuseblock
3.Removetheshortextensionwirefromtheredwire
andconnecttheblackconnectortothemating
connectorinthefuseblock.
13