Installation Instructions

2
RemovingtheHardstops
NoPartsRequired
Procedure
Ifyourmachinehashardstopsinstalled,theymustbe
removedbeforeinstallingtheSonicBoomKit.The
hardstopsarelocatedinthecenterboomofthecaged
boomsandcanbeseenwhentheboomsareinthe
upright,transportposition.Ifyourmachinedoesnot
havehardstopsinstalled,oristheolder,railstylebooms
skipthenextprocedure.
1.Raisetheboomsintothetransportpositionand
removetheignitionkey.
2.Removethe4bolts(5/16x1inch)andnuts(5/16
inch)securingthestopstothecenterboomframe
asshownin(Figure1).Removethehardstop
assembliesonbothsidesofthecenterboom.Retain
allpartsforlateruse.
G009415
1
2
3
4
Figure1
Rightsideshown
1.Centerboomassembly3.Bolt(5/16x1inch)
2.Assembledbracketand
bumper
4.Nuts(5/16inch)
3
InstallingtheUltrasonic
Sensors
Partsneededforthisprocedure:
2Ultrasonicsensor
8U-bolts
8
Washers(5/16inch)
8
Locknuts(1/4inch)
2Rubbersensorcover
2Protectiontube
4Wireclips
10
Cableties
Usethefollowingprocedureforboom
systemswithserialnumber260000001
andup.
1.Lightlysecuretherightultrasonicsensortotheright
boomuppersupportpipe;halfwaybetweenthe3rd
and4thnozzleasshowninFigure2,using2U-bolts,
4washers(5/16inch),and4locknuts(1/4inch).
Donotfullytightenatthistimetoallowforlater
adjustment.
Figure2
1.Sensor
3.Locknutsandwashers
2.U-bolts4.Protectiontube
2.Installtherubbersensorcovertothethreaded
portionoftheultrasonicsensor.
4