Operator's Manual

6
InstallingtheControlBox
Mount
Partsneededforthisprocedure:
4
Bolt(1/4x3/4inch)
4
Flangenut(1/4inch)
1
Controlboxmount
4
Bolt(5/16x1inch)
4
Locknut(5/16inch)
1Adapterplate
Forvehicleswithaserialnumberof
240000001orhigher
Onsomevehiclesthecontrolmountplateisattached
tothedashboardatthesamepointthehandthrottle
assemblyismounted.Ifthehandthrottlekitisinstalled
itmustbeseparatedfromthedashboardinorderto
installthecontrolmountplate.RefertotheHand
ThrottleKitOperator’sManualfordirectionsinremoving
andinstallingthehandthrottleassembly.
InstallthecontrolboxmounttotheWorkman
dashboard(oradapterplate)usingthreebolts(5/16
x1inch)andthreelocknuts(5/16inch)asshownin
Figure15.
Note:SomeolderWorkmanmachinesmayusefour
boltsandlocknuts.
Figure15
1.Controlboxmount3.Bolt(5/16x1inch)
2.Dashboard
4.Locknut(5/16inch)
Forvehicleswithaserialnumberof
239999999orlower
InstallingtheAdapterPlate
IfyouareinstallingthespraysystemonaWorkman
vehiclewithaserialnumberof239999999orlower,
youwillneedtousetheadapterplate,bolts,andnuts
includedinthelooseparts.
InstalltheadapterplatetotheWorkmandashboard
usingfourbolts(1/4x3/4inch)andfourangenuts
(1/4inch)asshownin
Figure16
Figure16
1.Adapterplate
4.Controlmount
2.Bolt(1/4x3/4inch)5.Bolt(5/16x1inch)
3.Flangenut(1/4inch)6.Locknut(5/16inch)
7
InstallingtheAttachment
Hold-downBrackets
Partsneededforthisprocedure:
2Hold-downbrackets
Procedure
1.Locateandremovethetworearboltsandange
nutsontheliftcylinderbracket(Figure17).Retain
thefastenersforlateruse.
18