Operator's Manual

10.Checkthealignmentofthetankskidandthevehicle
frame.Ifnecessary,loosentheboltssecuringthe
pivotlugtothetankskidframeslightly(Figure21).
Raisethetankassemblyjustenoughabovethe
vehicleframetobealignedandloweredintoproper
position.Tightentheboltsonthepivotlugoncethe
tankskidisalignedwiththevehicleframe.
11.Usetheaccesspanelsonbothsidesofthetank
skidtocheckforpinchingofanyhosesorwiring
(
Figure22).
Figure22
Rightsideshown
1.Accesspaneldoor
2.Interiorofthetankskid
Important:Ifanyhosesorwiringonthetank
skidassemblyarebeingpinchedorbent,raise
theassemblyup,adjustitspositioning,andtie
itemsback.
12.Repeatontheoppositeside.
13.Attachthepumpdrive:
Figure23
1.Rubbercowling
3.PTOoutputshaft
2.PTOdriveshaft
•Pullrearwardontherubbercowlingofthefront
ofthePTOdriveshaft(Figure23).
•InstallthedriveshaftontothePTOoutputshaft
(Figure23).
Important:VerifythePTOshaftissecuredby
makingsurethelockingballsareseatedinthe
grooveoftheoutputshaft.
14.Lineupthefrontmountingbracketswiththehold
downbracketsinstalledpreviously.
15.Securethetankskidassemblytotheframewitha
bolt(1/2x1-1/2inches),twowashers(1/2inch),
andalocknut(1/2inch)asshownin
Figure24.
Figure24
Leftsideshown
1.Frontmountingbracket
4.Washer(1/2inch)
2.Hold-downbracket
5.Locknut(1/2inch)
3.Bolt(1/2x1-1/2inches)
16.Repeatthesestepsforthefrontmountingbracket
andhold-downbracketontheoppositeside.
10
InstallingtheControlBox
Partsneededforthisprocedure:
1Knob
3J-clips
1
Bolt(1/4x3/4inch)
1
Flangenut(1/4inch)
1
SprayProdecal,US
1
SprayProdecal,CE
Procedure
Thecontrolboxismountedonthetankskidbyaclevis
pin,andhairpin.Itislocatedontheleftsidetoward
theback.
1.Removetheclevispin,andhairpinsecuringthe
controlboxtothetankskid.
21