Operator's Manual

Setup
Loose Parts
Use the chart below to verify that all parts have been shipped.
Step
Description
Qty.
Use
1
No parts required
–
Remove the existing bed.
2
No parts required
–
Prepare the Workman®.
Cover assembly
1
Gear tooth assembly
1
Screw (M6 x 1 inch x 12)
1
3
Spring washer (M6)
1
Install the vehicle speed sensor.
Fuse block
1
Fuse (10 amp)
1
Thermal breaker (30 amp)
2
Hex screw (#10-24 x 3/4 inch)
1
Phillips screw (#10-24 x 3/4 inch)
1
Locknut (#10-24)
2
Wire harness
1
Star washer
1
Wire tires
8
4
Fuse decal
1
Install the electrical harness.
Adapter bracket
1
Bolt (1/4 x 3/4 inch)
4
Flange nut (1/4 inch)
4
Control box mount
1
Bolt (5/16 x 1 inch)
4
5
Lock nut (5/16 inch)
4
Install the control box mount.
Support bracket assembly
1
Socket head bolts (3/8 x 1 inch)
2
Lock nut (3/8 inch)
2
Prop rod assembly
1
Clevis pin
1
6
Cotter pin
1
Install the prop rod assembly.
7
Hold-down brackets
2
Install the attachment hold-down
brackets.
Radiator cover assembly
1
8
Bolt (1/4 x 3/4 inch)
4
Install the radiator cover.
Tank and skid assembly
1
Clevis pins
2
Lynch pins
4
Bolt (1/2 x 1-1/2 inches)
2
Washers (1/2 inch)
4
9
Nuts (1/2 inch)
2
Install the tank skid.
12