Operator's Manual
Product Overview
Figure 30
1. Power switch, Spray Pro ™
monitor
4. Rate lockout key switch 7. Center boom switch 10. Right boom lift switch
2. Spray Pro ™ monitor
5. Master boom switch 8. Right boom switch
3. Application rate switch 6. Left boom switch 9. Left boom lift switch
Controls
Spray Pro ™ Monitor Power Switch
T he Spra y Pro monitor po w er switc h is the
On/Off switc h for the monitor . Press the switc h
to enable or disable the Spra y Pro monitor
( Figure 30 ). W hen the switc h is tur ned on, a light
on the switc h illuminates .
Master Boom Switch
T he master boom switc h allo ws y ou to star t or
stop the spra y operation. Press the switc h to
enable or disable the spra y system ( Figure 30 ).
W hen the master switc h is off , the Spra y Pro
screen reads “Hold. ”
Boom Switches
T he boom switc hes are located along the bottom
of the control panel ( Figure 30 ). T og gle eac h
switc h upw ard to tur n the cor responding boom
section on and do wnw ard to tur n them off . W hen
the switc h is tur ned on, a light on the switc h
illuminates . T hese switc hes will only affect the
spra y system when the master boom switc h is on.
Application Rate Switch
T he application rate switc h is located on the left
side of the control panel ( Figure 30 ). Press and
hold the switc h upw ard to increase the spra y
system application rate , or press and hold it
do wnw ard to decrease application rate .
Rate Lockout Key Switch
T he rate loc k out k ey switc h is located on the lo w er ,
left cor ner of the control panel ( Figure 30 ). T ur n
the k ey countercloc kwise to the loc k ed position to
disable the application rate switc h, thereb y k ee ping
any one from accidentally c hanging the application
rate . T ur n the k ey cloc kwise to the unloc k ed
position to enable the application rate switc h.
27