Operator's Manual

Problem
Possible Cause Corrective Action
1. A thermal breaker in the
fuse block responsible for
powering the actuator
has tripped due to
overheating.
1. Wait for the system
to cool down before
resuming operation.
If the thermal breaker
trip repeatedly, contact
your Authorized Service
Dealer.
Boom actuator is not
operating properly.
2. A thermal breaker in
the boom actuator
responsible for powering
the actuator has tripped
or malfunctioned.
2. Contact your Authorized
Service Dealer.
Troubleshooting the Spray Pro Monitor
Problem
Possible Cause Corrective Action
1. The monitor cable is
loose or disconnected.
1. Connect the monitor
cable.
The monitor does not
function.
2. The monitor or cable is
damaged.
2. Contact your Authorized
Service Dealer.
1. The monitor cable is
loose.
1. Connect the monitor
cable.
2. The speed sensor is not
calibrated correctly.
2. Calibrate the speed
sensor.
The Speed is always 0 or
erratic.
3. The speed sensor is
damaged.
3. Contact your Authorized
Service Dealer.
1. The sprayer width is not
correctly entered.
1. Check and set the
appropriate Width in
the calibration mode.
2. The speed sensor is not
calibrated correctly.
2. Calibrate the speed
sensor.
The Area is inaccurate.
3. The speed sensor is
damaged.
3. Contact your Authorized
Service Dealer.
1. The speed sensor is not
calibrated correctly.
1. Calibrate the speed
sensor.
The Distance is inaccurate.
2. The speed sensor is
damaged.
2. Contact your Authorized
Service Dealer.
50