Installation Instructions

Figure19
1.Turn-signalswitch3.Hoseclamp
2.Steering-wheelvalve
7
InstallingtheHorn
Partsneededforthisprocedure:
1Hornassembly
1
90°bracket
1
Flange-headscrew(5/16x3/4inch)
1
Flangelocknut(5/16)
Procedure
1.Removethenutand90°bracketfromthehorn
assembly(Figure20).
Figure20
1.Horn3.Nut
2.90°bracket
2.Rotatethe90°bracketasshowninFigure20and
looselysecureittothemountingstudofthehorn
assemblywiththenutthatyouremovedinstep1.
Note:Youwilltightenthenutofthehornassemble
inalaterprocedure.
3.Aligntheholeintheshortlegofthe90°bracketwith
theholeintherear-platformchannel(Figure21).
4.Assemblethe90°brackettotheplatformchannelwith
theange-headscrew(5/16x3/4inch)andtheange
locknut(5/16)asshowninFigure21.
Figure21
1.Hornassembly
3.Flangelocknut(5/16)
2.Flange-headscrew(5/16
x3/4inch)
5.Torquetheange-headscrewandangelocknutto
198to254∙N∙m(175to225in-lb).
11