Installation Instructions

3
InstallingtheFrontandRear
Lights
Partsneededforthisprocedure:
1Headlightsupport
3
Bolt(5/16x2-1/4inch)
3
Washer(5/16inch)
3
Flangedlocknut(5/16inch)
2Headlight
1
Rear-lightbracket(left)
1
Rear-lightbracket(right)
2Rear-lightassembly
InstallingtheFrontLights
1.Aligntheholesinthefront-lightsupportwiththeholes
inthefrontchannelofthechassis(Figure8).
Figure8
1.Flangedlocknut4.Washer
2.Frontchannel
5.Bolt(5/16x2-1/4inch)
3.Front-lightsupport
2.Securethelightsupporttothechannelwiththe3bolts
(5/16x2-1/4inch),3washers,and3angedlocknuts
(Figure8).
3.Torquetheboltsandnutsto19.8to25.4N∙m(175
to225in-lb).
4.Removethelocknut(10mm),1jointhalf,and1
serratedshellfromtheheadlightassembly(Figure9).
Figure9
1.Threadedpost(headlight)4.Verticalhole(front-light
support)
2.Jointhalf5.Locknut(10mm)
3.Serratedshell
5.Alignthethreadedpostoftheheadlightwiththe
verticalholeattheendoftheheadlightsupport(Figure
9).
Note:Ensurethattheupperjointhalfandtheserrated
shellarealignedasshowninFigure9.
6.Installtheheadlighttothefront-lightsupportwiththe
serratedshell,jointhalf,locknutthatyouremovedin
step4andtightenthenuthandtight.
7.Repeatsteps4through6fortheotherheadlight.
6