Installation Instructions

Installation
Note:InstalltheHighFlowHydraulicControlKitto
thevehiclebeforeinstallingthespreaderbase.Referto
theInstallationInstructionsincludedwiththekit.
1.Removeallcomponentsfromthepackaging.
Removeandretaintheattachmentmounting
bracketsandfastenersusedtosecurethespreader
frametothepackagingskid.
2.Routethehydraulichosesthroughtheguidesalong
therightsideoftheframe(Figure1).Ensurethat
thestraightttingendsofthehosesgototherearof
thespreaderframe.
3.Insertarubbergrommetintotheholeintheaccess
cover(Figure1).
4.Insertthefrontendofthehosesthroughtheaccess
holeinthecover.
5.Mounttheaccesscovertothespreaderframewith
4washerheadscrews(Figure1).
6.Installthe2straightttingsandO-ringstothe
motor(Figure1).
7.ConnectthefronthosettingsandO-ringstothe
straightttingsonthemotor(Figure1).
8.Securethedriveshafttothespreaderdriveshaft
withabolt(3/8x2-1/2inches)andnut(3/8inch)
(Figure1).
9.Securethemotormounttothespreaderframewith
2bolts(3/8x4-1/4inches)andnuts(3/8inch)
(Figure1).
10.Securethehydraulicmotortothemotormountwith
2bolts(1/2x1-1/2inches)andnuts(1/2inch)
(Figure1).
G010812
1
2
3
4
5
6
7
8
Figure1
1.Hydraulichose3.Rubbergrommet5.Motormount
7.Straighttting
2.Accesscover
4.Driveshaft
6.Hydraulicmotor
8.Driveshaftcover
11.Withthebedlowered,removetheclevispinsand
lynchpinssecuringeachcylinderrodendtothebed
mountingplates(Figure2).
2