FORM NO. 92-0398 ( MODEL NO, 4141240001 & UP PARTS CATALOG SET-UP AND ' TOR, for the SKID SPRAYER HOSE BEE KIT J Refer to the illustrated Parts Catalog for the %ails of parts used in assembling the Hose f Kit. FRAME ASSEMBLY: 1. Install the two Leg Assemblies onto the Skid Sprayer frame as shown in FIG. 1, using eight Mounting Lugs, eight 3/8* x cap screws and lock nuts. Tighten the fasteners fo "just snug’ fo permit any necessary adjustments. Hose Reel Mounting Says 4.
. Disconnect the 25 #t, Spray Hose and Hand Gun famished with the Skid Sprayer. The Hose wolf not be used with the Hose Reel Kit. Remove the Hand Gun from the Spray Hose and wipe the intake port clean, 3. Apply thread sealer and install the Hand Gun onto the 150 fi. Spray Hose coiled around the Hose Reel Spool. 4. Apply thread sealer and screw the 70° Supply Hose into the threaded. hole in the Swivel Assembly as shown in FIG. 3. Tighten securely. AG. 3 1. Supply Hose 8. Spray Hose 2. Swivel Assembly 5.
HOSE REEL FRAME [Ret] Part No. Description aty | [meme part no. Description aty Hose Feel Assembly 1 Hex Nut, /2 NC 4 212047 -AGD HHS, 3/8NC x 1 4 823-13-GD Log Washer, 1/2 4 Flat Washer, 3/8 4 8142579 Hose Reel Leg Says ALH.
HOSE REEL for SKID SPRAYER Re fl Part No. | Description Qty | | EFL Paring. Description lat 142887 §1l4—20x5f8 Machine Screw 12 i 14122~11~AJFD {Hex Whiz Nut, L2 2142988 i Lock Handle Assembly 1 16 928258 Inst Assembly 15 342338 !Fame ~ Side 2 \ 18 }92-8255 Outlet Tube, 1/2° | 1 442340 {Bearing & Brake Collar Says 2] | 17120-24-GAD HHS, 5/1BNCx /4 [ 5 |42a41 | Flange Stoop 2l | poring St }Hex Skt Had Set Screw, 2 | 19 192-8255 Fricasseeing Flange , 1 ! |¥BNCX 12 |20 1920334 | Spray Hose Assembly, 1 |Beating
